Milling the primary half on the Tormach PCNC 1100! Making the primary chips is all the time thrilling. I’m utilizing a 2-flute, 1/4″ HSS finish mill at 4,000 RPM and 30 IPM on a block of 6061 Aluminum and a 38MM face mill at 1,000 RPM and 30 IPM.

[top]
21 Responses to Cutting the first part! Machining Aluminum
  1. @saunixcomp I ran two Hurco VM10 machines. Conversational programming and CAD/CAM using GibbsCam and SurfCam.


[top]
Leave a Reply